We found 404 articles in total. Displaying matches 101 to 120.
| Automatic Wire & Tubing Cutter
By Editor (15 Dec 10 9:05) in Technical News |
| Eraser's Model WC302 Automatic Wire & Tubing Cutter is an automatic wire and flexible tubing cutter that easily and accurately cuts wire, tubing, sleevings and more to the programmed length and number of pieces. Nine variable feed rates allow the operator the flexibility to choose the correct rate for a |
|
| Optical Length and Speed Gauge (down to Zero)
By Editor (17 Nov 10 9:35) in Technical News |
| Zumbach Electronics presents a new, high-tech length and speed measuring gauge.
The Speel 3000 is designed for applications requiring very high accuracy even at very high velocities. The gauge is available for a measuring distance of 300 mm (11.81 in.), featuring a focus area of |
|
| Measure profiles & shapes with hi-tech and cost-effective Zumbach Systems.
By Editor (17 Nov 10 9:35) in Technical News |
| Zumbach Electronics introduces a new, ultra-modern profile measuring system. The Profilemaster® PMM 80 is the latest model available in the Zumbach's Profilemaster® family, enabling measurement systems using Light Section principle and Machine Vision. The design was focused to achieve the best price / performance ratio for all |
|
| Diameter measurement with high single value precision
By Editor (17 Nov 10 9:30) in Technical News |
| Sikora presents the new diameter gauges of the Laser Series 6000 for online diameter measurement during the wire and cable production. The devices convince customers by their clever design and highest precision.
Outstanding is the high measuring rate of 2,500 measurements per second. All measurements show an extremely high single value precision. Precise single values are decisive in order to define the fluctuation range of |
|
| Nextrom Optical Fiber Glass preform manufacturing technology
By Editor (17 Nov 10 9:25) in Technical News |
| Nextrom, is a premium supplier of Optical Fiber Glass Preform manufacturing equipment, Fiber Draw Towers, Fiber Coating, manufacturing solutions for Fiber Optic Cables and associated machinery for the global fiber market using MCVD, OVD and VAD technologies.
Nextrom developed a Graphite Induction Furnace which is designed for fast drawing of large diameter optical fiber preforms. This is ensured by the long hot zone and large furnace diameter. Nextrom offers furnace systems with two |
|
| Die Quip Corporation introduces new machine
By Editor (17 Nov 10 8:55) in Technical News |
| Die Quip Corporation is introducing a new machine to their line of precision die finishing equipment.
The Die Flex MA is the second machine in the Die Flex line. It is a semi-automatic angle polishing and sizing machine. Once the operator places the die into the machine an |
|
| New Transformer Turns Ratio measuring instrument Tettex TTR 2796
By Editor (15 Sep 10 9:35) in Technical News |
| A close collaboration with major transformer manufacturers has lead to the new Tettex 2796 Transformer Turns Ratio Meter. It combines mobility and user friendly handling with unmatched accuracy of up to 0.03%.
The higher test voltage of 250 V together with the |
|
| Gauder Group a world leader
By Editor (15 Sep 10 9:35) in Technical News |
| Rotating Machines for communication and power cables and Resale Equipment for all wire & cable works
New machines
“Innovation and quality are the key notes of the Pourtier and Setic rotating offer. Both companies develop added-value processes and solutions for optimized wire and cable production. Gauder Group is in the top ranking with its |
|
| In-Line surface quality inspection
By Editor (15 Sep 10 9:35) in Technical News |
| Zumbach Electronics introduces a new, ultra-modern surface inspection system. The Simac® 63 is the latest model available in the Zumbach's family of surface inspection using state-of-the-art image processing. The design was focused to achieve the best price / performance ratio for practically all tubes, hoses, cables and other quality products made of |
|
| Innovation: Length 6000 perfect synthesis of quality, reliability and cost saving
By Editor (15 Sep 10 9:30) in Technical News |
| Sikora presents the new Length 6000, a reliable system for non-contact online length measurement of cables. For this method, the product image and its movement are defined and thus the speed and the produced length calculated.
The technology of the Length 6000 is based on an optical measuring principle. In combination with two laser diodes, two image sensors are positioned next to each other. In sequence the cable passes both image sensors. The |
|
| India based AEI unveils latest technology Rigid Strander
By Editor (15 Sep 10 9:15) in Technical News |
| Associated Engineers & Industrials Ltd. (AEI) has 40 years of expertise in manufacturing of high technology stranding machines for the production of medium, high and extra-high voltage power cables.
In the recent years the company’s focus has been singularly on the perfection of Rigid Stranding Machines. The result is the latest line of reliable and versatile ASRB Stranding Machines suitable for manufacture of |
|
| DCM Cable Testing Solutions announces New web site
By Editor (15 Sep 10 9:05) in Technical News |
| DCM Industries has re-designed and enhanced its website enabling improved access to product and support information. The new |
|
| Temperature consciousness: The Ultratemp 6000 measures the melt temperature
By Editor (14 Sep 10 12:00) in Technical News |
| The Ultratemp 6000 is Sikora’s latest development for the power cable sector. It is a non-contact polyethylene melt temperature measurement system based on non-invasive ultrasonic technology. It is specifically tailored to the production of medium voltage (MV) and high voltage (HV) XLPE insulated power cables.
The system |
|
| Wire screening with SZ- technology
By Editor (28 Jul 10 10:20) in Technical News |
| Over years Rosendahl - as technology leader in SZ-stranding processes for the wire and cable industry - delivered many high-end stranding solutions to its market. Additionally to stranding Fiber Optic elements and insulated conductors, Rosendahl offers the perfect SZ technology solution for stranding of single wires for screening applications. For the cable |
|
| Maguire more than doubles throughput of low-cost Gravimetric feeder
By Editor (28 Jul 10 10:05) in Technical News |
| New-Generation MGF™ Feeder Can Be Linked by Means of Maguire® G2™ Software into Plant-Wide Network Similar to that Available for Maguire Blenders
An advanced model of the Maguire® MGF gravimetric feeder provides more than double the throughput of the original system but has the same compact size and offers the same substantial price advantage over competing gravimetric units, it was announced today by Maguire Europe. The company will introduce the new feeder to the world market at |
|
| A new 3 axis fault detection generation
By Editor (28 Jul 10 10:00) in Technical News |
| Zumbach Electronics presents a new Lump and Neckdown detector of the highest level. For continuous quality control, lump & neckdown detectors are as important as diameter gauges and spark testers.
The new line of KW 13Trio detectors capture with the highest accuracy, reliability and velocity even the smallest lumps and neck downs in wires, conductors, optical fibres, cables, tubes and hoses.
Thanks to its very compact |
|
| Troester showed itself to be optimally positioned at wire 2010 in Dusseldorf.
By Editor (28 Jul 10 9:55) in Technical News |
| "The exhibition went exceedingly well." That was the overwhelming verdict of exhibitors at this year's Wire trade fair. Troester GmbH & Co. KG – one of the world's leading manufactures of machines and systems for the production of power cables – also declared itself to be extremely satisfied with the outcome of the fair.
"The market seems to be recovering, even though it never really suffered a collapse in Troester's core business: CV lines for high and extra-high-voltage cables. The number and especially the quality of enquiries increased significantly and our discussion partners usually were directly at the companies |
|
| Eder Engineering advanced Tungsten Carbide Die Working Technology
By Editor (28 Jul 10 9:50) in Technical News |
| Eder Engineering offers a complete range of tungsten carbide die working technology to suit every die workshop. For applications where mainly dies of varying size and or profile are required the range of semiautomatic machines (e.g. ETC-1/HF, IG 100-A) offers the greatest flexibility and potential.
For applications such as drawing wire for |
|
| Nothing’s impossible:- an all-rounder in the Wire Processing Sector
By Editor (28 Jul 10 9:50) in Technical News |
| Wire Bending and Forming Center FMU 0.7
By popular request, Wafios have supplemented the FMU line wire bending and forming centers with the FMU 0.7. This machine processes spring steel wire according to “DIN EN 10 270” in the bottom diameter range between 0.15 and 0.8 mm. Thus the FMU line covers a diameter range from 0.15 to 6.5 mm.
The FMU 0.7 enables the production of components from round wire as well as profiled wire.
For the important automotive industry, mainly torsion springs, tension springs with loops according to DIN 2097 as well as bent parts can be produced on the FMU 0.7. In the automotive sector, torsion springs are often designed as |
|
| Introduced at Wire 2010 the Wafios Nailmaster setting new standards for performance and productivity!
By Editor (28 Jul 10 9:50) in Technical News |
| For this year's leading trade fair in wire processing, Wafios AG announced a world first for the nail industry. The newly developed Nailmaster produces wire nails with lengths of 50 - 100 mm (2"-4") from wire with a diameter of up to 3.8 mm (.150"), at a rate of 1,400 wire nails per minute. This rate of production can also be achieved with the maximal nail sizes. The machine operates fully automatically and produces clean, precisely formed nails separated from tip waste and was developed specifically to be linked with a thread roller or a collator.
From the customer's point of view, the following are worth noting in particular...
The improved product quality and variety
The ability to produce "clean" nails with the tip waste separated during the production process must truly be |
|
