We found 124 articles in total. Displaying matches 101 to 120.
| Institut Dr. Foester will be at Wire 2006 Hall 12 booth B16
By Editor (14 Feb 06 12:00) in Exhibitions |
| Institut Dr. Foerster Reutlingen - for more than 50 years the leading manufacturer of non-destructive eddy current and magnetic flux leakage test systems with 80 % export exhibits at two booths
• wire: Hall 12, booth B16
• Tube: Hall 4, booth A31
|
|
| The entire Austrian group can be found in their traditional position at Hall 10 Austrian Pavillion
By Editor (14 Feb 06 11:00) in Exhibitions |
| Sixteen members of the AWCMA/VOEDKM will exhibit within the group pavillion (approx. 1000 m² exhibition space ) with another four members exhibing in other halls on stand alone booths
The following AWCMA member companies will display their latest technologies,
hard and software for the economic production of wire and cable in Hall 10 :Stand : No. 10 A 40/10 B39:
|
|
| Eder stand located in their traditional hall Stand No. 10B39/A40
By Editor (14 Feb 06 10:45) in Exhibitions |
| Eder Engineering-Austria with a leadership and experience of nearly 60
years in ultrahard precision die-tools, particularly in advanced die-tool processing machines, will display the following exhibits/developments at their large Stand in Hall 10
|
|
| CONDAT THE NEW VICAFIL® RANGE AT WIRE 2006
By Editor (14 Feb 06 4:00) in Exhibitions |
| At WIRE Düsseldorf 2006, CONDAT will display its complete new VICAFIL range that fits with the most recent European legislations (REACH).
This range covers all the industrial needs in the field of wire drawing, rolling, drawing of bars and tubes, offering:
• Non-reactive precoatings
• Dry lubricants
• Soluble lubricants
• Oils, greases and pastes
• Protection products
• Degreasing products
|
|
| BILWINCO A/S at WIRE 2006 in Düsseldorf 24.-28. April 2006, hall 16, stand no. 16 E 39
By Editor (14 Feb 06 3:50) in Exhibitions |
| All-purpose multihead weighers of BILWINCO
At WIRE 2006, BILWINCO will present a number of multihead weighers, type BW, and supplementary equipment for the fully automated weighing and packaging of all types of wire/fastener products – nails, screws, bolts, nuts, etc. The multihead weighers will weigh the whole spectrum of portion sizes between 10 g and 25 kg or even more. All the multihead weighers of BILWINCO can be quickly changed to another product without any mechanical adjustments.
|
|
| AIM Inc.to demonstrate the Accuform Modular AFM-3DI-T at Wire Duesseldorf
By Editor (14 Feb 06 3:00) in Exhibitions |
| AIM, inc will demonstrate the AccuForm Modular AFM-3D1-T CNC wire bending machine with enhanced wire feed capability. The Ultra option allows a feed rate of 150 meters/minute, the Bender 3000 deg/sec. and Tool change time is 170 mSec– unmatched in the industry.
|
|
| FMS to display its full range at Wire Duesseldorf
By Editor (14 Feb 06 2:00) in Exhibitions |
| At WireExpo 2006, FMS will display its full line of products for the wire and cable industry.
FMS products include: wire and cable tension measurement and control systems, tension sensors (load cells), measuring amplifiers, tension controllers (closed loop), |
|
| Pay a visit to Ebner Austria based industrial furnace manufactures
By Editor (13 Feb 06 15:00) in Exhibitions |
| EBNER-Industrieofenbau, Linz/Austria, designs and manufactures industrial furnaces for semi-finished products for the steel and non-ferrous industries. HICON/H2® bell type furnace technology was established for wire and rod in the early seventies. |
|
| BMS to be present again at Wire Duesseldorf
By Editor (13 Feb 06 14:00) in Exhibitions |
| As usual, BMS will be present at the Wire Düsseldorf trade fair on the booth 17 A 31 with a surface of 52 sq.m. The company will exhibit different machines to show the large range of available equipement.
|
|
| Aeroel Srl. will present its new generation of Xactum Laser Micrometers
By Editor (13 Feb 06 12:00) in Exhibitions |
| Aereol will present its new generation of Xactum Laser Micrometers for very high accuracy diameter measuremet,at "Wire 2006" Duesseldorf.
THE XLS (eXactum Laser Scan Micrometer) series LASER GAUGES, represents the latest technological development in laser scanning micrometry, featuring record performance.
|
|
| Alloy Wire International is pleased to be exhibiting at Wire 2006
By Editor (13 Feb 06 9:00) in Exhibitions |
| Alloy Wire International is pleased to be exhibiting at Wire 2006 and look forward to participating at the show.
As a reminder of their capabilities, Alloy Wire International can supply high performance NICKEL ALLOY wire in diameters from 0.02mm to 16mm in a range of tensile strengths to suit the application. These metals range from simple soft alloys such as Nickel Iron to extremely complicated and tough alloys such as MP35N and RENE 41. Although they are manufacturers, they always aim to supply customers in the shortest time possible and have invested heavily in stocks to maintain lead times as short as one to two weeks. Their flexibility as manufacturers also makes it possible to supply in quantities as small as 1kg.
|
|
| Advanced Optical Instrumentation
By Editor (11 Feb 06 22:00) in Exhibitions |
| At "Wire 2006" Conoptica is for the first time both adding 3 – 5 axis quality control technology to its product range and further expanding its automatic feeding technology. Conoptica’s technology represent the high end of 2D and 3D optical control and cover a wide range of applications with dimensional and geometrical measurements of Shaped and Round Drawing Dies, Enamelling Dies, Wires, Rods, Bars, Tubes, Plugs, Needles, and many other precision tools and products. The applications are from low cost single and multiple 2D inspections to the top of the line automated 3D production and quality control. These systems automatically measure key geometrical parameters of dies such as: diameter, ovality, bearing length, reduction angle, meeting point parameters, etc. |
|
| AMBA’s new product line BBW (large flat die threader)
By Editor (11 Feb 06 4:00) in Exhibitions |
| AMBA is well known as a nearly 100 year old specialist in cold forming technologies. After the development of several spoke machine generations as well as the mechanical and hydraulic rod headers and bolt makers, AMBA designs a new product family for long screws.
BBW is a generation of threaders for long threads with flat dies. The actual ‘BBW – 10 – 600’ produces wood threads up to 24” in length and up to1/2” in diameter. The machine follows the established way of horizontal work piece transport. It threads the bolt at a slow speed of one piece per minute for easy tool adjustments. |
|
| Continuus-Properzi, Italy, HALL 11-BOOTH D40
By Editor (11 Feb 06 4:00) in Exhibitions |
| Continuus-Properzi company, one of the world’s leading manufacturers of CCR lines for non-ferrous wire rod production, actually the inventor of such a method, provides the industry since the mid forties of last century, with complete product lines which include all elements from furnaces to double wire rod coiler.
The company features its Properzi CCR continuous casting and rolling system and technology for wire rod specially designed for the production of Aluminium and Copper wire rod, this latter being produced using as starting material either copper cathodes or 100% low quality copper scrap. In both cases the obtained quality is a first class one. |
|
| World renowned Boxy Group will be at
By Editor (11 Feb 06 3:50) in Exhibitions |
| Boxy Group (including Boxy SpA, Italy, and Mossberg Reel LLC, U.S.A.) offers a complete range of steel reels and drums for the wire and cable industry – this includes:
fully machined reels for copper wire drawing;
particularly resistant reels for steel wire drawing;
one-way shipping reels;
forged reels;
heavy-duty reels;
large cable drums
and many more
|
|
| It's worth a visit to Construcciones Mecanicas Caballe at
By Editor (11 Feb 06 3:00) in Exhibitions |
| With over 50 years experience in the manufacture and design of rotating machinery for the production of power, LAN, telecommunication, optical fibre, and control cables as well as steel ropes, the Spanish company Construcciones Mecánicas Caballé provides the cable industry with a wide array of stranding and cabling machinery, developing new equipment for the manufacture of high quality products:
The company’s portfolio includes the following equipment for:
• Power cables: single twist stranders, double twist stranders, SZ stranders, tubular stranders, rigid stranders, planetary stranders, bow skip stranders, and drum twisters. |
|
| WIRE 2006 - Entrust Gauder Group with your Wire and Cable projects booth 10E38!
By Editor (10 Feb 06 16:00) in Exhibitions |
| As a one-stop integrated supplier, Gauder Group will reflect its dynamic expansion – 30 years in 2006! – Staging three complementary activities.
Resale equipment possibilities
In addition to the continuously updated “Gauder Group Explorer” software, the second-hand department will be originally configured on the booth showing the equipment capabilities thanks to a wide range of cable samples. The opportunity to visit the stock of equipment in the Belgian premises remains available for free.
|
|
| Come and see the latest technology from Delisi
By Editor (10 Feb 06 16:00) in Exhibitions |
| Delisi Company manufactures smooth and ribbed wire straightening and cutting machines for diameter 1 to 20 mm.
The most important innovation lies in the spinner: there is a new pre-regulated unit with dies for the rapid change of diameter. Feeding rolls are never changed; the requested groove can be regulated by the hand-wheel. |
|
| Borealis turns the spotlight on latest cabling innovations at Wire 2006
By Editor (01 Feb 06 10:15) in Exhibitions |
| Borealis, the world’s leading provider of polyolefin compounds for the global wire and cable industry, will showcase state-of-the-art polyolefin compounds solutions to visitors of Wire 2006, from April 24-28, 2006 in Düsseldorf, Germany (Messe Düsseldorf, Hall 10, Stand N10-D70).
Together with Borouge, its joint venture in the Middle East, Africa and Asia Pacific with the Abu Dhabi National Oil Company (ADNOC), Borealis will highlight active commitment to investing in and providing technically advanced, high quality, innovative, and cost-effective solutions for cable manufacturers and end-users. Borealis aims to provide the optimal plastics solution for the manufacturer and the end customer of the cable, keeping manufacturers competitive and ensuring end users receive the best quality cables for distributing energy and transmitting information.
|
|
| Zumbach at Wire 2006
By Editor (25 Jan 06 9:00) in Exhibitions |
| At the WIRE 2006 in Düsseldorf ZUMBACH will again present many new developments and products. The following is a summary of the most important ones:
Sensors
The advanced ODEX® 10 concentricity and diameter gauge for wire extrusion. Extremely accurate and advanced insensitive to environmental conditions. Fully non-contact, based on magnetic and laser technology.
New laser based diameter gauges for very big cables and profiles.
Large 3-axis laser diameter gauges with incorporated fault detection.
ETHERNET TCP/IP enabled diameter gauges for direct networking without need of external processors.
|
|
