We found 2582 articles in total. Displaying matches 1661 to 1680.
| Niehoff; VNIIKP cooperation intensified
By Editor (09 Jul 08 8:55) in Developments Worldwide |
| Maschinenfabrik Niehoff and All-Russian Scientific Research and Development Cable Institute VNIIKP with the associated "Trade House of VNIIKP" have added even more significance to their long-lasting cooperative partnership with the conclusion of a cooperation agreement.
Beginning on July 1st, 2008 the “Trade House of VNIIKP” will act as an adviser for NIEHOFF in the markets of Russia, Belarus, Armenia and Uzbekistan with the objective of further contact development and intensification between Niehoff and the companies in this economic area. |
|
| Scapa Cable Solutions – cable solutions for all environments
By Editor (09 Jul 08 8:55) in Developments Worldwide |
| Scapa Cable Solutions offer a wide range of woven and non-woven cable wrapping tapes which are used by cable manufacturers around the world.
These tapes have been used in many of the Worlds major cable projects such as the Thunderhorse, NorNed, Ormen Lange and Estlink to name but a few.
The woven range comprises of:
Semi Conductive tapes - for core and conductor screening, these tapes offer the additional benefit of high strength for binding purposes. Various grades are available should bedding or extrudate penetration resistance properties be required.
|
|
| Triple Twist technology : more than 140 machines are in production worldwide !
By Editor (09 Jul 08 8:50) in Developments Worldwide |
| Bolstered up by this success, Setic (Gauder Group) presented at Wire 2008 an affordable Triple Twist solution offering best quality at 50 % higher production speeds !
This new cost-effective solution enables the production of cat. 6/6e LAN cables up to 6000 TPM with an optimal investment / performance ratio.
|
|
| Nextrom and Rosendahl, Wire Düsseldorf 2008 the most successful fair in the groups history
By Editor (08 Jul 08 16:00) in Developments Worldwide |
| This year’s wire show was the best one ever for the group. The booth was constantly crowded with attendees from the complete global wire, fiber and cable industry. The Kick-point tournament was appreciated, together with the groups traditional hosting, which offered a great variety of wine and other Austrian and Finnish specialities. |
|
| Niehoff: Wire 2008 Trade Fair Participation the Best Ever
By Editor (08 Jul 08 12:00) in Developments Worldwide |
| The most important event for the wire and cable industry this year was the Wire 2008 trade show with more than 1,120 exhibitors participating from around the globe. Maschinenfabrik Niehoff, one of the world's leading manufacturers of machinery for the wire and cable industry, reports its most successful participation ever at a wire trade show.
The completely new opto-electronic traversing system NBAT for double twist bunching machines as well as the MT200/ RI170.2 line which features new annealing and preheating technology for the inline production of data and telephone wires generated an exceptional amount of interest and attention. |
|
| A Full Dozen
By Editor (08 Jul 08 12:00) in Developments Worldwide |
| Wire and Tube have presented themselves together in Düsseldorf for the twelfth time now.
The next date for Wire 2010 and Tube 2010 is confirmed: The two leading international trade fairs, Wire, International Wire and Cable Trade Fair, and Tube, International Tube Trade Fair, will show the best their respective industries have to offer from 12 to 16 April 2010. The combined innovative power of these growth industries will again be showcased in the halls of the Düsseldorf Exhibition Centre in 2010. However the successful trade fair duo will not be held in conjunction with Metav in 2010.
|
|
| Alsafil reponds to growing demand
By Editor (07 Jul 08 20:45) in Developments Worldwide |
| As a fully integrated copper alloy producer, Alsafil, a Nexans company, has responded to the growing demand for wires for use in low temperature products (heating cables, fusion welding, etc.) by extending its range of alloys to include Cuni2, CuNi6, CuNi10, CuNi23 and CuNi44 in addition to the existing CuSn, CuZn and CuNiZn alloys. Alsafil can meet requirements for specific electrical resistance as standard and a wide range of diameters from 0.25 to 2.5mm are available.
|
|
| Visitors wowed by biggest ever Fastener Fair for the UK & Ireland
By Editor (04 Jul 08 12:00) in Developments Worldwide |
| “With the fastener industry preparing for less settled times, Fastener Fair Coventry provided new opportunities for a profitable future,” says Organiser.
The 12th Fastener Fair for the UK and Ireland took place in Coventry on 11 and 12 June, with 140 exhibitors taking up more space than ever before. Just over 1000 visitors attended from all over the UK and Ireland, 75% of whom had purchasing responsibility for their companies.
“Almost exactly the same number of visitors came as two years ago,” says Ramsdale. “In fact, there were slightly more, which is a remarkable achievement for a mature event that’s been running since 1995. It shows that Fastener Fair Coventry is the industry’s key exhibition, and that with the help of our exhibitors we’ve managed to keep things fresh, lively and compelling for visitors.”
|
|
| New compact 3D machine
By Editor (02 Jul 08 11:00) in Developments Worldwide |
| Aim Inc., the World’s leader in CNC wire bending solutions introduces a new Compact 3D machine: the highly robust and efficient AFC series (AccuForm Compact). With up to 8mm wire capacities, the AFC machines set new benchmarks for cost effective, automatic wire bending operations.
|
|
| Wire Expo 08 meets mission of presenting wire industry with forum for technical,exhibition, and networking in Steel City
By Editor (27 Jun 08 10:00) in Developments Worldwide |
| The Wire Association International (WAI), Inc., with the support of its Ohio Valley Chapter and more than 100 volunteers, hosted an activity-rich event that included exhibits, technical and social programs as part of Wire Expo 2008 and its 78th Annual Convention that concluded last week at the David L. Lawrence Convention Center, Pittsburgh, Pennsylvania, USA.
Participation figures totaled 1957 and exhibition space was filled by 308 exhibiting companies. The event attracted participants from 38 states offering drive-in traffic from the industry workers in the surrounding regions of Pennsylvania, Ohio, New York, Indiana, and Michigan. |
|
| Prospect of fastener prices doubling
By Editor (26 Jun 08 15:05) in Developments Worldwide |
| “Little sign of inflationary pressures abating,” says industry expert.
Fastener industry expert Phil Matten has delivered a hard-hitting analysis of the factors propelling the cost of all types of steel fasteners along the steepest inflationary track witnessed in decades. Matten, the editor of Fastener & Fixing magazine, told a packed forum at the recent Fastener Fair Coventry that he could see costs across the range of standard steel fasteners being 40% to 60% higher than 2007 levels within a matter of months.
|
|
| Knill Technology prepares for further expansion after a record year
By Editor (20 Jun 08 16:00) in Developments Worldwide |
| The Knill Technology group with its companies Rosendahl, Nextrom and Silitec achieved last business year an order intake of more than 100 Million Euro. This is another important step in the growth and strengthening the leading technology and market position. Knill Technology is setting the course toward further growth based on organic development as well by acquisitions and has implemented new structures within the organisation to meet the challenges that lie ahead.
|
|
| Meltech at Wire 2008
By Editor (18 Jun 08 9:20) in Developments Worldwide |
| Meltech Engineering has come a long way since the last Wire show. Well known as a supplier of electrically heated, strand annealing furnaces and high speed, coiling equipment to the wire and cable industry, the company's stand reflected a significant broadening of its product range and engineering capability.
|
|
| Great success for DSE A/S (Dansk System Elektronik)at the Wire Düsseldorf 2008 exhibition
By Editor (18 Jun 08 9:15) in Developments Worldwide |
| DSE A/S proves they are still among the best within test solutions for the wire industry. Many visitors at Wire Düsseldorf showed a strong interest in DSE solutions.
In April, Danish DSE attended the Wire Düsseldorf 2008 exhibition in Germany. The company was well represented and attracted many visitors from all over the world to its stand. The customers showed high interest in the High Voltage Continuity Tester Flexible (HVC), which DSE introduced last year, as well as the upcoming new Tangent Delta tester – the TD5. The customers also experienced DSE’s unique feature for testing of all types of enamelled
wire for both round and rectangular wire.
|
|
| Orders booked for six cable compound lines Buss: Outstanding success at the wire and Chinaplas trade fairs
By Editor (18 Jun 08 9:10) in Developments Worldwide |
| For Buss AG of Pratteln, Switzerland, this year’s wire trade fair was the most successful ever. The company booked orders for no less than six cable compound kneading lines. Also at the Chinaplas 2008 international plastics and rubber industries fair, Buss high-performance Kneaders for compounding heat and shear sensitive plastics attracted great interest among the numerous specialists present.
|
|
| IPEC UltraSense Quality monitor for EHV power cable
By Editor (18 Jun 08 9:05) in Developments Worldwide |
| IPEC Ltd had a very enthusiastic reception at Wire 08 for their UltraSense quality monitor for high voltage and extra high voltage cable insulation. People are particularly interested in the measurement of the smoothness of the interface between the insulation and the inner semiconductor layer and the detection of voids and inclusions close to this interface.
|
|
| A thank you from Inosym
By Editor (18 Jun 08 9:05) in Developments Worldwide |
| The management of New Zealand based Inosym take this opportunity to thank all of their customers that visited their booth during the recent wire and tube exhibition in Düsseldorf Germany.
The show was very successful. Inosym signed a couple for contracts for supply of reels and over 130 new inquiries were received. |
|
| Integrated products exhibited at the recent Wire 2008
By Editor (18 Jun 08 9:05) in Developments Worldwide |
| By acquiring the Henkel wire drawing lubricant business in July 2007, Condat was looking to obtain a perfect match with its well-known VICAFIL® range.
Condat was already offering its customers the largest lubricants range available worldwide, for cold forming applications covering rod/wire drawing, cold rolling, drawing of bars and tubes as well as cold heading.
|
|
| Aumann Vertical Wire Drawing Unit for Wire Enamelling Systems
By Editor (18 Jun 08 9:00) in Developments Worldwide |
| Aumann designed a much improved in-line drawing machine, parallel to the development of their new generation of DLH 8-wire enamelling systems.
This in-line drawing machine is capable to produce the complete range of finish wire diameters, for the three different DLH 8-models, from 0.16 to 1.00 (1.20) mm [16.5–34 AWG], from only 3 inlet wire diameters 1.6, 2.0 and 2.5 mm [10, 12, 14 AWG], resulting in cost reductions for sourcing and the inventory of raw materials.
Change-over efficiency is increased by having to change only 2 drawing dies. Maximum machine up time is guaranteed by the heavy welded steel frame, the individual encased bearings and a multi-safety system for bearing protection.
|
|
| Added-value business with services and spare parts
By Editor (18 Jun 08 9:00) in Developments Worldwide |
| As a one-stop integrated supplier, Gauder Group has developed an after-sales strategy based on worldwide service presence.
With more than 30 years experience in buying and selling wire and cable machinery, the group proposes a unique approach of combined lines with reconditioned and new items |
|
