We found 2613 articles in total. Displaying matches 2281 to 2300.
| Dynamex Corporation are on stand/booth 3713 at Interwire 2007
By Editor (07 Mar 07 8:00) in Developments Worldwide |
| On display will be the newest version of its patented Automatic Tape-Splicer for high-speed taping at the extruder. First low cost, small footprint, longitudinal taping system with fully automatic on-the-fly splicing at full line-speed. This revolutionary process enables taping continuously with unattended automatic splices at constant tension. Payoff is now equipped with digital drives, and runs up to 1,500 FPM (460 m/min). |
|
| See Italy based Delisi at Interwire 2007
By Editor (07 Mar 07 8:00) in Developments Worldwide |
| Delisi Srl is the only company which builds wire straightening and cutting machines with the rapid change of diameter. The spinner is supplied with a straightening unit of pre- regulated jaws for each diameter of wire to work: it is enough to install the correct straightening unit suitable to the wire to work and the spinner will be ready to work without waste of time and material. |
|
| Come and visit Conoptica at this years Interwire 2007
By Editor (07 Mar 07 8:00) in Developments Worldwide |
| Conoptica is launching several new production & quality control systems aimed specifically at the challenges the shaped wire & rod industry face.
It is necessary to measure both the drawing die and the product for efficient quality control of shaped wires and rods. If the wire or rod dimensions deviate from nominal values, the drawing die might need modification. A quality control system that can measure corresponding parameters for both product and tool is needed to specify the correct drawing die parameters.
|
|
| FMS USA Inc., look forward to seeing you at Interwire 2007
By Editor (07 Mar 07 8:00) in Developments Worldwide |
| At Interwire 2007, FMS will display its full line of products for the wire and cable industry.
FMS products include: wire and cable tension measurement and control systems, tension sensors (load cells), measuring amplifiers, tension controllers (closed loop), BUS systems (Profibus, DeviceNet, CAN-open, etc) and other direct tension control products. |
|
| You can see EMG/Macbee's new payoff at Interwire
By Editor (07 Mar 07 8:00) in Developments Worldwide |
| California based EMG/Mabee will be pleased to see old and new customers on their booth at Interwire 2007.The booth will be featuring photos and various literature on a complete line of machinery for the wire and tube industry. |
|
| Please call on booth 2218 while you are at Interwire 2007
By Editor (07 Mar 07 8:00) in Developments Worldwide |
| Gravure Co.,Inc will be exhibiting at Interwire 2007 I-X Convention Center, Cleveland, Ohio May 5-10, 2007 booth Number 2218 with their Domino® A-Series ink jet printers, No VOC & low VOC ink jet fluids for Domino® and all other major brands of ink jet printers, pigmented ink jet inks for wire & cable, printing wheels & contact printing equipment, contact printing inks & accessories |
|
| Fenn Technologies will be on booth 1437 at Interwire 2007
By Editor (07 Mar 07 7:45) in Developments Worldwide |
| Fenn Technologies, Metal forming Solutions Division has over 100 years experience designing and supplying equipment for the metal forming industry. It’s extensive product range includes Rolling Mills, Wire Flattening and Shaping Lines, Wire and Tube Drawing Machines, Turks Heads, Rotary Swaging Machines, Torin CNC Spring Coilers, Vinston CNC Wire Formers and TS Precision Stamping and Forming Machines.
|
|
| Come and see Heatbath at Interwire on booth 1932
By Editor (07 Mar 07 7:00) in Developments Worldwide |
| Heatbath Corporation supplies an innovative line of cleaning, coating and lubricating chemistries for ferrous wire. |
|
| data M to present its software programme COPRA® Wire Rolling at booth 2407B.
By Editor (07 Mar 07 7:00) in Developments Worldwide |
| At Interwire 2007 in Cleveland data M Software + Engineering will be presenting its software program COPRA® Wire Rolling at booth 2407B.
The software supports the effective design of wire rolling tools and the finite element simulation of the complete wire rolling process.
The starting product for shaped wire is very often round or rectangular wire. Proceeding from this geometry, the wire is turned into the required final form by means of a number of rolling passes. So only the starting and final state of the wire is known. As shaped wires very often have geometries with different radii, the definition of respective intermediate stages is a complex matter.
|
|
| Germany based Hezel will be pleased to see you on their booth at Interwire 2007
By Editor (07 Mar 07 7:00) in Developments Worldwide |
| Hezel will be showing the hydraulic bar shearing machine type AMH 4 (bar steel cropper)
The hydraulic bar shearing machine is suitable for economical cropping of section steel and rods up to diam. 30 mm by a max. tensile strength of 800 N/mm2 (Steel and non-ferrous
metal). The capacity is up to 7,5 kW. The shearing speed is up to 1.600 cut-offs per hour with
single bar feed, up to 6.000 cut-offs per hour with quadruplicate bar feed.
|
|
| ASB Industries will be at Interwire 2007 Cleveland, Ohio, May 7-10th booth 2444
By Editor (07 Mar 07 7:00) in Developments Worldwide |
| Attention to details and committed to advanced surfacing technology ASB Industries works with challenging applications to provide enhance thermal spray surfacing for wear on critical surfaces for wire processing equipment.
|
|
| Can-Eng furnaces will be on stand/booth 404
By Editor (06 Mar 07 16:20) in Developments Worldwide |
| Can-Eng Furnaces, an industry leader in the design and manufacturer of continuous mesh belt furnace systems for production heat treatment of wire and fasteners, can deliver any/all of the components of a fully integrated and automated heat treating system including: furnaces, ovens, quenches, washing systems, atmosphere generators, material handling and feeding components. Standard capacities range from 250 lb/hr to 7,500 lb/hr. Process capabilities include clean hardening, light case carburizing and carbonitriding, austempering and martempering. |
|
| Anbao (Qinhuangdao) will be on booth 434 at interwire 2007
By Editor (06 Mar 07 16:00) in Developments Worldwide |
| P.R.C (China) based Anbao is a wire manufacturer and exporter in China that specializes in cable armouring wire, galvanized wire for ACSR and strands for ACSR, spring wire, stainless steel wire, black annealed wire, |
|
| C.M. Caballe will be in Cleveland
By Editor (06 Mar 07 16:00) in Developments Worldwide |
| With over 60 years of experience in the design and manufacture of rotating machinery for making copper LAN, telecom, fiber optics, data, control and power cables as well as steel ropes, Caballé provides the cable industry with a wide array of stranding, twinning, bunching and cabling machinery. |
|
| Condat will be pleased to met with you on their booth 1933 at Interwire 2007
By Editor (06 Mar 07 15:15) in Developments Worldwide |
| Since its foundation in 1854, CONDAT has specialised in the development of innovative chemical products, among which a wide range of industrial lubricants that has made a name for the company.
Thanks to the synergy of the group in terms of developing international markets and a broad technical knowledge, the VICAFIL range has become a world wide reference for the wire drawing market.
|
|
| Aztech Lubricants will be exhibiting on booth 1941 at Interwire 2007
By Editor (06 Mar 07 11:00) in Developments Worldwide |
| Aztech Lubricants LLC will have on their booth( number 1941) a line of data sheets together with examples of their AZWipe and Dosmatic pumps. Their experienced staff will be available to answer all your technical questions
|
|
| Visit Amacoil on booth 3709
By Editor (06 Mar 07 8:00) in Developments Worldwide |
| Amacoil, Inc., will exhibit the complete line of Uhing "rolling ring" winding traverse drives, assemblies and accessory products. Especially featured will be the model FA spooling assembly with flange detection. Detection of spool flanges via sensors improves spooling accuracy and eliminates need to manually adjust end stops. |
|
| Switzerland based Disa are on booth 1635
By Editor (06 Mar 07 8:00) in Developments Worldwide |
| Disa, a leading supplier of shot blast and shot peening systems for surface treatment in the wire and spring industries, offers a complete range of solutions and sophisticated technologies for surface preparation. As an overall supplier, Disa can combine complementary manufacturing tasks and realize complete installations; interface risks are eliminated. The line of shot blast machines includes proven stand-alone and in-line solutions for mechanical descaling and shot peening.
|
|
| Leader in Packaging Equipment Announces Company Name Change to REELEX Packaging Solutions, Inc.
By Editor (01 Mar 07 15:00) in Developments Worldwide |
| New York company operates under new business name and offers a wider range of products and services to customers.
Global packaging company Windings, Inc. is changing its name in March 2007 to REELEX Packaging Solutions, Inc.
"We are excited to announce our new company name," said Tom Copp, President. "The REELEX brand name is already widely known in the wire and cable industry. As we expand our business outside of our traditional customer base, our new name will make it easier for potential customers to identify us, and what we do.
|
|
| Borealis and Piramidal enter strategic alliance
By Editor (01 Mar 07 14:50) in Developments Worldwide |
| Borealis, a leading provider of innovative, value creating plastics solutions and Piramidal Termoplásticos LTDA, a leading distributor of thermoplastic resins and compounds, have entered a strategic alliance regarding the distribution of Borealis’ Polypropylene compounds, further supporting customers by providing full after sales care.
|
|
